Redesigned Blanket Cylinder Pivot Screw for AB Dick 360/8800's/9800's/9900's

PARTS BULLETIN

MODELS: AB DICK 360/8800's/8900's/9800's/9900's

SECTION: INNER BLANKET CYLINDER GEAR

SUBJECT: REDESIGNED PIVOT SCREW

In November 2000, beginning with SN:70063, the Inner Blanket Cylinder Gears were redesigned to improve performance for AB Dick Models 360, 8800's, 8900's, 9800's, and 9900's.

The mounting hole in the redesigned gear is 1" (½" deeper). If you are just replacing the screw, measure to see if you have the ½" pivot screw or the 1" pivot screw. However, If you are replacing the gear and have the ½" pivot screw you will also need to order the 1" screw.

Note: this does NOT effect Models 385. 9880 and 9890 presses.

MODEL	DESCRIPTION	PART NUMBER SN: 70062 & below	PART NUMBER SN: 70063 & above
9800/9900 Series	Gear	009554	009554
9800/9900 Series	Pivot Screw	078556 (½")	403295 (1")
360/8800/9800 Series	Gear	078415	078415
360/8800/9800 Series	Pivot Screw	078556 (½")	403295 (1")

Revised: September 13, 2010